WPE-1K.jpgWPE
Wall Mount Egress
The WPE is a die-cast aluminum, modern style wall pack with a 5000K LED engine and a 70+ CRI. The battery provides 90 minutes of emergency lighting. The finish is corrosion resistant dark bronze powder coating. The luminaire is UL1598 and cULus listed.
Resources
CONSTRUCTION
Architectural style wall pack, modern design, die-cast aluminum housing provides excellent thermal management. Integral battery ideal for wall mount egress lighting.
OPTICS
Prismatic polycarbonate reflector. Light engines available in 5000K (70+ CRI).
ELECTRICAL
70+ CRI LED. 956lm under AC mode, 433lm under Emergency Battery mode. 0°C up to 50°C (32°F up to 122°F) maximum operating temperature.
>54,000 hr LED at L70. Driver operates at 120-277V input, 50/60Hz, <20% THD, 0.9 power factor.
4.8V 1800mAh Nickel Cadmium Battery, Backup time greater than 90mins. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.
Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours. Integral photocontrol.
MOUNTING
Surface mount via back plate that fits most standard size junction boxes. Conduit mount via rigid conduit entry provision on top of the unit.
STANDARD FINISH
Corrosion resistant Dark Bronze powder coating finish.
CUSTOM FINISH
Corrosion resistant Black, Graphite Metallic, Gray, Silver, and White, or custom RAL#.
CERTIFICATION
Wet Location Listed. Meets Buy America Act requirements.
All luminaires are built to UL1598 standards and bear appropriate cULus labels. For Emergency application, equiped with UL924 certified battery packs.
WARRANTY
5-year warranty, see Limited Warranty for additional information.
Architectural style wall pack, modern design, die-cast aluminum housing provides excellent thermal management. Integral battery ideal for wall mount egress lighting.
OPTICS
Prismatic polycarbonate reflector. Light engines available in 5000K (70+ CRI).
ELECTRICAL
70+ CRI LED. 956lm under AC mode, 433lm under Emergency Battery mode. 0°C up to 50°C (32°F up to 122°F) maximum operating temperature.
>54,000 hr LED at L70. Driver operates at 120-277V input, 50/60Hz, <20% THD, 0.9 power factor.
4.8V 1800mAh Nickel Cadmium Battery, Backup time greater than 90mins. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.
Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours. Integral photocontrol.
MOUNTING
Surface mount via back plate that fits most standard size junction boxes. Conduit mount via rigid conduit entry provision on top of the unit.
STANDARD FINISH
Corrosion resistant Dark Bronze powder coating finish.
CUSTOM FINISH
Corrosion resistant Black, Graphite Metallic, Gray, Silver, and White, or custom RAL#.
CERTIFICATION
Wet Location Listed. Meets Buy America Act requirements.
All luminaires are built to UL1598 standards and bear appropriate cULus labels. For Emergency application, equiped with UL924 certified battery packs.
WARRANTY
5-year warranty, see Limited Warranty for additional information.
CCT
- 5000K
CRI
- 70 CRI
Lamp Life
- 54000 hrs
Lamp Source
- LED
Listings
- UL
- cULus
Materials
- Die-Cast Aluminum
- Polycarbonate
Ratings & Compliance
- Assembled in America
- Buy American Act (BAA)
- DLC Premium
- Made in America
- Wet
Special Programs
- Quick Ship
Voltage
- 110-277 V
- 120-277 V
Warranty
- 5 yr
Weight
- 4 lbs
