HB2 - High Bay

CONSTRUCTION

• Low profile single piece die-cast aluminum housing, thermally separated
  electronic and LED heat sink design, maximizes heat dissipation and life
  expectancy of the luminaire.

• IP66 rated protection against dust and water.

• Suitable for interior/exterior, wet, high-pressure hosedown applications.

 

OPTICS

• Frosted scattering diffuser, cuts off glare by 98%, emits soft and direct
  illumination.

• Diffuser secured on body protects LED against solid and liquid impact, symmetric LED board layout offers maximum uniformity illumination.

ELECTRICAL

• 70+ CRI Samsung LED.

• -40°C up to 55°C (-40°F up to 131°F) maximum operating temperature.

• Long-life 54,000 hr LED at L70.

• Driver operates at 120-277V input, 0-10V dimmable driver, down to 10%.

• 50/60Hz, <20% THD, 0.9 power factor.

• Optional 347/480V input.

• Optional dimming sensor for occupancy and ambient light level detection.

MOUNTING

• Pendant mount 3/4” conduit entry on top of fixture with snap hook.

• Optional Yoke mount bracket.

FINISH

• Standard corrosion resistant semi-gloss White finish.

 

CERTIFICATION

• IP66 Wet location label standard.

• All luminaires are built to UL1598 standards and bear appropriate cULus labels.

• For Emergency application, equipment with UL924 certified battery packs.

• DLC® Premium (DesignLights Consortium Qualified)

 

WARRANTY

• 5 year warranty, see Limited Warranty for additional information.