Post Top

CONSTRUCTION
Low copper aluminum alloy die-cast body. Architectural appearance, low EPA wind load design. 
IK09 rated enclosure protects electrical equipment against external mechanical impacts. All external fasteners are stainless steel.

 

OPTICS
Molded silicone gasket throughout insures the sealing between the two compartments and provides ingress protection. 
PMMA acrylic lens offers exceptional light distribution and durability without yellowing over time. 
Field Selectable CCT light engine available in 3000 ~ 5000 K (80 CRI) configurations. The optics can conform to dark sky requirements.

ELECTRICAL
80+ CRI LED. -40°C up to 45°C (-40°F up to 113°F) maximum operating temperature. 60,000 hr LED at L70. 50/60Hz, <20% THD, 0.9 power factor.
Driver operates at 120-277V input, 1-10V dimmable driver, down to 10%. Field Selectable Output between 45 ~130W.

SENSORS (OPTIONAL)
SENSOR-BLE-619 Integral PIR ALS Control bluetooth/on/off/dimming/photosensing.
SENSOR-823 Integral PIR on/off/dimming/photosensing.
SENSOR-PH-PB-U Integral button style photocell.
CONTROL-AVI-LVFA AVI-ON Bluetooth Mesh Controller.

MOUNTING
Suitable for 3” tenon, 2-3/8” tenon adapter included.
Optional for 4” and 5” tenon adapter

STANDARD FINISH
Corrosion resistant Dark Bronze powder coating finish.
CUSTOM FINISH
Corrosion resistant Black, Graphite Metallic, Gray, Silver, White, Custom RAL#.

CERTIFICATION
IP66 Wet location label standard. Meets Buy America Act requirements. IDA compliant: with 3000K color temperature selection. 
All luminaires are built to UL1598 standards and bear appropriate cULus labels. For Emergency application, equipment with UL924 certified battery packs. 
DLC® Premium (DesignLights Consortium Qualified)

WARRANTY
5-year warranty, see Limited Warranty for additional information.