Slim Wet Location Bay Light

CONSTRUCTION
Low profile single piece die-cast aluminum housing, thermally separated electronic and LED heat sink design, maximizes heat dissipation and life expectancy of the luminaire.
IP66 rated protection against dust and water. Suitable for interior/exterior, wet, high-pressure hosedown applications.

OPTICS
Frosted scattering diffuser, cuts off glare by 98%, emits soft and direct illumination.
Diffuser secured on body protects LED against solid and liquid impact, symmetric LED board layout offers maximum uniformity illumination.

ELECTRICAL
70+ CRI Samsung LED. -40°C up to 55°C (-40°F up to 131°F) maximum operating temperature.
Long-life 54,000 hr LED at L70. Driver operates at 120-277V input, 0-10V dimmable driver, down to 10%. 50/60Hz, <20% THD, 0.9 power factor.
Optional 347/480V input. Optional dimming sensor for occupancy and ambient light level detection.

SENSORS (OPTIONAL)
SENSOR-BLE-619 Integral PIR ALS Control bluetooth/on/off/dimming/photosensing.
SENSOR-823 integral PIR on/off/dimming/photosensing.
SENSOR-820 integral PIR on/off/dimming/photosensing.
CONTROL-AVI-LVFA AVI-ON Bluetooth Mesh Controller.

MOUNTING
Pendant mount 3/4” conduit entry on top of fixture with snap hook. Optional Yoke mount bracket.

STANDARD FINISH
Corrosion resistant semi-gloss White finish.

CERTIFICATION
IP66 Wet location label standard. All luminaires are built to UL1598 standards and bear appropriate cULus labels.
For Emergency application, equipment with UL924 certified battery packs. DLC® Premium (DesignLights Consortium Qualified)

WARRANTY
5-year warranty, see Limited Warranty for additional information.