Flood Light

CONSTRUCTION
Rugged die-cast aluminum one-piece housing with corrosion resistant powder coat paint finish. Internal venting fins create optimal heat dissipation and allow all water to drain from the face of the luminaire. Front accessible maintenance access to electrical components with removal of three screws from front of fixture housing.

OPTICS
High impact UV stabilized acrylic outer lens protects LEDs and allows for cleaning and debris removal. Lens hardware is internal to the fixture allowing for uniform pressure on the gasket for an optimal water tight seal. Available NEMA distributions: Type III, Wide (7x7). Stock Version: 5000K Wide (7x7).

ELECTRICAL
70+ CRI Lumileds LED. -40°C up to 45°C (-40°F up to 113°F) maximum operating temperature. Long-life 100,000hr LED at L70. Driver operates at 120-277V input, 50/60Hz. 1–10V dimming driver standard, option to have leads pulled out for easy connection. <20% THD, 0.9 power factor. 4kV surge protection, 10kV surge protector optional. Optional 347V / 480V Driver. Optional twist lock photocell control.

CONTROL (OPTIONAL)
CONTROL-XFAC AVI-ON Bluetooth Zone Controller Adapter
SENSOR-PH-PT-U/UD/HD Twist lock dimming/non-dimming photocontrol.

MOUNTING
Standard adjustable yoke mount (YM) bracket.
Optional adjustable slipfitter (SF) for 2-3/8” tenon.
Optional adjustable wall mount (WM) bracket.

STANDARD FINISH
Corrosion resistant Dark Bronze powder coating finish.
CUSTOM FINISH
Corrosion resistant Black, Graphite Metallic, Gray, Silver, White, Custom RAL#.

CERTIFICATION
IP66 Wet location label standard. Meets Buy America Act requirements.
All luminaires are built to UL1598 standards and bear appropriate cULus labels.

WARRANTY
5-year warranty, see Limited Warranty for additional information.